Kodak 1191857 Camcorder User Manual


 
Using your camera
www.kodak.com/go/support
7
Adjusting the LCD to improve viewability
The camera has the ability to sense the light level in your environment and adjust LCD
brightness so it’s easier to see. You can let the camera control LCD brightness or
change the setting to suit your needs.
To Do this Result
Let the
camera
automatically
adjust LCD
brightness
Leave the LCD Brightness setting at Automatic. (See
page 14.)
The LCD
automatically
adjusts to
changing light
conditions.
Conserve
battery
power
1 Press the Settings button .
2 Press to choose LCD Brightness & Glare Shield,
then press OK.
3 Press OK to uncheck Automatic.
4 Press to highlight LCD Brightness, then to
change the setting to Low.
5 Press to choose Done, then press OK.
The LCD stays
relatively dim to
save power.
Manually
control LCD
brightness
1 Press the Settings button .
2 Press to choose LCD Brightness & Glare Shield,
then press OK.
3 Press OK to uncheck Automatic.
4 Press to highlight Enable Glare Shield, then press
OK to check it.
5 Press to choose Done, then press OK.
6 Press to return to liveview.
7 In Liveview, press to turn on Glare Shield.
Glare is
reduced and
viewability
improved, but
recorded videos
and pictures are
not affected.