Filter
Top Products
14
Using Fill Flash and Off Flash
Fill Flash
— Bright light indoors or outdoors from backlit subjects can create dark
shadows (especially on faces) in high-contrast scenes. Use fill flash to lighten the
shadows.
Off Flash
— When you do not want to use the flash, especially indoors where flash is
prohibited, such as in theaters and museums, or in dim lighting situations, use off
flash. Use a tripod (tripod socket [17]) or place the camera on another firm support.
1. Lift the lens cover/flash (2),
➍
completely up.
2. Press the select/flash button (12) to select fill flash (26) or off flash (28).
3. Press the shutter button (1) to take a picture.
4. Press the select/flash button to return to the auto-flash/start position (24).
UNLOADING THE FILM
After you take the last picture on the film cassette, the film automatically starts to
rewind. When the film is fully rewound, the LCD panel (10) displays “0” and an empty
film cassette (c). When you remove the cassette from the camera, the LCD panel
displays “E,” (a).
Using the Rewind Button
If you don’t want to take pictures on the entire film cassette, you can automatically
rewind the film by pressing the rewind button (14). Once you’ve used this feature,
you cannot reload the same film cassette into the camera.