Filter
Top Products
7
BATTERY
This camera uses a 3-volt lithium KODAK KCR 2 (or equivalent) Battery that
supplies power for all camera operations. This camera automatically turns off
after 1 minute.
Battery Indicator
When the battery symbol (22) “blinks,” you will need to replace the battery soon. When
the battery symbol is solid (non-blinking) and the shutter button does not operate,
replace the battery immediately.
Battery Tips:
• Keep a spare battery with you at all times. Lithium batteries perform
consistently until they suddenly die.
• Read and follow all warnings and instructions supplied by the battery manufacturer.
• Keep battery away from children.
• Do not attempt to disassemble, recharge or short circuit the battery, or subject it to
high temperature or fire.
• Store battery in its original packaging prior to use.
LOADING THE FILM
1. Slide the film-door latch (18) and insert the film cassette completely into the film
chamber
➌
. Do not force the film cassette into the film chamber.
2. Close the film door (19) to start the auto-film advance. The LCD panel (10) will
show the total number of exposures (b). After you close the safety-interlock film
door, you cannot open the film door until the film is completely rewound into
the film cassette.