Kodak 400 III Photo Printer User Manual


  Open as PDF
of 2
 
1 Imaging speed and throughput is dependent on media sensitivity.
All values are for media sensitivity of 130mj/cm.
2 Tested with Kodak Workflow Solutions. For additional information about the test conditions, please consult your Kodak representative.
Kodak Magnus 400 II E Platesetter
Trendsetter 400 III Quantum Platesetter specifications
General specifications
Technology
830 nm thermal imaging platesetter, semiautomatic, external drum
Load/unload systems
ContinuousLoad
Enhanced semiautomatic loading: as one plate is being imaged, another is placed on standby for automatic
loading and unloading.
Autoloader
Automated plate loading and unloading of up to 40 plates without slip sheets (0.3mil)
Performance specifications
Throughput at 2400 dpi
1, 2
for plate size 724 x 838 mm
(28.5 x 33 in.)
V speed: 43 plates per hr
50 plates per hr with ContinuousLoad or Autoloader
Repeatability
-
+
5 microns (± 0.2 mil) between two consecutive exposures on the same plate left on the drum (at largest
plate size and over full temperature range)
Accuracy
-
+
20 microns (± 0.8 mil) between two plates imaged by dierent Trendsetter Platsetters (at largest plate
size and over full temperature range)
Registration
-
+
25 microns (± 1.0 mil) between image and plate edge (at largest plate size and over full temperature range)
Workflow connectivity Kodak Prinergy Evo Workflow System
Kodak Prinergy Workflow System
Connection to third-party workflow systems
Imaging specifications
Resolution 2400dpi (94.4dpmm) or 1200dpi (47.2dpmm)
Screening 450 lpi max linescreen
20-micron Staccato Screening
Optional: 10-micron Staccato Screening
Maximum plate size:
around drum x along drum
838 x 990 mm (33 x 39 in.)
Minimum plate size:
around drum x along drum
270 x 229 mm (10.6 x 9 in.)
305 x 229 mm (12 x 9 in.) with Autoloader or ContinuousLoad in manual bypass mode
394 x 508 mm (15.5 x 20 in.) for Autoloader or ContinuousLoad in automation mode
Kodak Trendsetter 400 III Quantum Platesetter
The platesetter is a Class 1 Laser Product
and fully complies with EN60825-1 and US
Federal Regulations 21 CFR 1040.10 - CDRH.
To learn more about solutions from Kodak:
Visit graphics.kodak.com
Printed using Kodak Technologies.
Eastman Kodak Company
343 State Street
Rochester, NY 14650 USA
©Kodak, 2008. Kodak, Trendsetter, Quantum, Prinergy, Prinergy Evo
Staccato,
squarespot, and Thermal Direct are trademarks of Kodak.
Subject to technical change without notice.
E.PS.319.0308.en.01
 previous