Kodak 7239 Film Camera User Manual


 
EASTMAN EKTACHROME Film (Daylight) 7239™ H-1-5239 3
Sensitometric Curves
Spectral-Dye-Density Curves
LOG EXPOSURE (lux-seconds)
3.0
0.0
2.0
DENSITY
1.0
2.0
3.0
4.0
1.0
0.0 1.0
F002_0149AC
G
B
R
Process:
Exposure:
Densitometry:
Daylight, 1/100 second
VNF-1
Status A
G
-0.2
250
WAVELENGTH (nm)
650
DIFFUSE SPECTRAL DENSITY
0.3
1.3
750550
450350
0.8
Yellow
Cyan
Magenta
Normalized dyes to form a visual neutral density
of 1.0 for a viewing illuminant of 5400 K.
VNF-1Process:
F002_0151AC
Spectral-Sensitivity Curves
Modulation-Transfer Curve
These photographic modulation-transfer values were determined by
using a method similar to the one described in ANSI Standard
PH2.39-1977(R1990). The film was exposed with the specified
illuminant to spatially varying sinusoidal test patterns having an aerial
image modulation of a nominal 35 percent at the image plane, with
processing as indicated. In most cases, these photographic
modulation-transfer values are influenced by development-adjacency
effects and are not equivalent to the true optical modulation-transfer
curve of the emulsion layer in the particular photographic product.
Note: While the data presented are typical of production coatings, they
do not represent standards which must be met by Kodak. Varying
storage, exposure, and processing conditions will affect results. The
company reserves the right to change and improve product
characteristics at any time.
700 750650600550500450400350300250
*Sensitivity = reciprocal of exposure (ergs/cm ) required
to produce specified density
WAVELENGTH (nm)
2
LOG SENSITIVITY
2.0
0.0
1.0
*
1.0
2.0
F002_0150AC
1.0Density:
Process:
Effective Exposure:
Densitometry:
VNF-1
1.4 seconds
E.N.D.
Layer
Forming
Yellow-
Layer
Forming
Magenta-
Layer
Forming
Cyan-
1001 2 3 4 5 10 20 50 200 600
SPATIAL FREQUENCY (cycles/mm)
RESPONSE (%)
10
1
2
5
3
7
30
20
100
70
50
200
F002_0148AC