Kodak 8749400 Digital Camera User Manual


 
38 www.kodak.com/go/support
Troubleshooting
Picture quality problems
Status Solution
Picture is not clear
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
Clean the lens (see page 45).
Make sure the camera is not in Macro mode if you are more than
27.6 in. (70 cm) from your subject.
Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
Picture is too dark
Reposition the camera for more available light.
Use Fill flash (see page 6) or change your position so light is not
behind the subject.
Move so that the distance between you and the subject is within the
effective flash range. (See camera specifications starting on
page 43.)
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
Picture is too light
Reposition the camera to reduce the amount of available light.
Turn the flash off (see page 6).
Move so that the distance between you and the subject is within the
effective flash range. (See camera specifications starting on
page 43.)
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
In Auto mode, adjust the Exposure Compensation (see page 22).