Filter
Top Products
38 www.kodak.com/go/support
Troubleshooting
Picture quality problems
Status Solution
Picture is not clear ■ Clean the lens (see page 42).
■ Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
■ Use a larger picture size (see page 27).
■ If you’re manually adjusting the ISO speed, realize that high ISO
setting may cause grainy pictures (see page 28).
Picture is too dark ■ Reposition the camera for more available light.
■ Use Fill flash (see page 8) in Program mode, Backlight in SCN mode,
or change your position so light is not behind the subject.
■ Move so that the distance between you and the subject is within the
effective flash range. (See Specifications, page 40.)
■ In Program mode, increase the Exposure Compensation (see
page 28).
Picture is too light ■ Reposition the camera to reduce the amount of available light.
■ Turn off the flash (see page 8).
■ Move so that the distance between you and the subject is within the
effective flash range (see Specifications, page 40).
■ In Program mode, decrease the Exposure Compensation (see
page 28).