Filter
Top Products
Troubleshooting
www.kodak.com/go/support
41
Camera/computer communications
Ready light blinks
green.
■ Camera is operating normally.
Ready light blinks
amber.
■ Wait. Resume picture taking when the light stops blinking and turns
green.
Ready light blinks
red and camera
turns off.
■ Install new batteries (page 1) or charge rechargeable batteries.
Ready light glows
steady red.
■ Transfer pictures to the computer (page 13), delete pictures from the
camera (page 11), switch image storage locations (page 25), or insert
a card with available memory (page 3).
■ Wait. Resume picture taking when the light turns green.
■ Change the image storage location to internal memory (page 25), or
use a different card.
Ready light glows
steady green.
■ Camera is operating normally.
If... Try one or more of the following
The computer does
not communicate
with the camera.
■ Visit www.kodak.com/go/c743support or
www.kodak.com/go/c703support.
■ Turn on the camera (page 2).
■ Install new batteries (page 1) or charge rechargeable batteries.
■ Connect cable to camera and computer port (page 13).
■ Install the software (page 12).
■ Disconnect the USB cable. Close all open applications. Re-install the
software (page 12).
■ Disconnect camera from the computer. Close all software applications,
reconnect camera.
If... Try one or more of the following