Filter
Top Products
Doing more with your camera
www.kodak.com/go/support
34
Taking pictures using the AF lock
For special situations where AF may not work (page 33):
1 Set the AE/AF Lock button to AF.
2 Place the Framing marks on the main subject.
3 Press the AE/AF Lock button.
4 Recompose the picture and press the Shutter button halfway to lock the
exposure position.
5 Press the Shutter button completely down to take the picture.
NOTE: The AF lock function lets you release the Shutter button to recompose the picture.
Using the program button
You can program this button in Capture and Review. The button is a shortcut to your
favorite settings. For example, if you frequently adjust the White balance settings, you
can program this button to bring up the White balance sub-menu—no need to access
the menu to search for it. The Program button may be unavailable in some modes.
NOTE: For rapid setting changes, see page 40.
Press OK or Set.
In Capture or Review, press
Program to bring up a
sub-menu
.
(Press
again to exit.)
1
2
3
to highlight a setting.
NOTE: The Program button
assignment is kept until you
change it in Setup menu or
reprogram it by holding the
Program button.
Program the button
Press the Program button 3 seconds
to access your favorite
shortcut
setting.