Filter
Top Products
Doing more with your camera
www.kodak.com/go/support
45
Running a continuous slide show loop
When you turn on Loop, the slide show is continuously repeated.
1 On the Slide Show menu, press to highlight Loop, then press the OK button.
2 Press to highlight On, then press the OK button.
The slide show repeats until you press the OK button or until battery power is
exhausted. The Loop feature remains until you change it.
Displaying pictures and videos on a television
You can display pictures and videos on a television, computer monitor, or any device
equipped with a video input. (Image quality on a television screen may not be as good
as on a computer monitor or when printed.)
NOTE: Ensure that the Video Out setting (NTSC or PAL) is correct (see table on page 36). The slide show
stops if you connect or disconnect the cable while the slide show is running.
1 Connect an audio/video cable from the camera USB, A/V Out port to the television
video-in port (yellow) and audio-in port (white). See your television user’s guide for
details.
2 Review pictures and videos on the television.
Pre-tagging for album names
Use the Set Album (Still or Video) feature to pre-select album names before you take
pictures or videos. Then, all the pictures or videos you take are tagged with those
album names.
First—on your computer
Use Kodak EasyShare software that came with your camera to create album names on
your computer. Then copy up to 32 album names to the album name list the next time
you connect the camera to the computer. See Kodak EasyShare software Help for
details.