Filter
Top Products
Data Sheet—2 Copyright, Eastman Kodak Company, 1993
TI2082 Revised 10-93
6) Color Balance
This film is balanced for exposure with tungsten illumination (3200K). You can also expose it with tungsten
lamps that have slightly higher or lower color temperatures (+/- 150K) without correction filters, since final color
balancing can be done in printing. For other light sources, use the correction filters in the table below.
Light Source
KODAK Filters on Camera
1
Exposure Index/DIN
Tungsten (3000 K) WRATTEN Gelatin No. 82B 320/26
Tungsten (3200 K) None 500/28
Tungsten photoflood(3400 K) None 500/28
Daylight (5500 K) WRATTEN Gelatin No. 85 320/26
White-Flame Arcs WRATTEN Gelatin No. 85B 200/24
Yellow-Flame Arcs Color Compensating 20Y 320/26
Optima 32 None 500/28
Vitalite WRATTEN Gelatin No. 85 320/26
Fluorescent, Cool White
2
WRATTEN Gelatin No. 85 + 10M 200/24
Fluorescent, Deluxe Cool White
2
WRATTEN Gelatin No. 85C + 10R 320/26
Metal Halide WRATTEN Gelatin No. 85 320/26
1
These are approximate corrections only. Make final corrections during printing.
2
These are starting-point recommendations for trial exposures. If the kind of lamp is unknown, a KODAK Color
Compensating Filter CC 40R can be used with an exposure index (EI) of 250/25.
NOTE: Consult the manufacturer of high-intensity ultraviolet lamps for safety information on ultraviolet radiation
and ozone generation.
7) Exposure Table-Tungsten Light
At 24 frames per second (fps), 170-degree shutter opening:
Lens Aperture f/1.4 f/2 f/2.8 f/4 f/5.6 f/8 f/11 f/16
Footcandles
Required
510204080160 320 640
Use this table for average subjects that contain a combination of light, medium, and dark colors. When a subject
includes only pastels, use at least 1/2 stop less exposure; dark colors require 1/2 stop more exposure.