Filter
Top Products
Mechanized Processing
Notice: Observe precautionary information on products labels and on the Material Safety Data Sheets.
Gen 5 films can be processed in Kodak RA 2000 developer and replenisher, diluted either 1:2 or 1:4. To
achieve the highest productivity (20-second development time) and the best image quality and linearity,
use a 1:2 dilution. To achieve the maximum savings in chemical usage, use a 1:4 dilution and a 30-second
development time.
The recommended starting points for development and replenishment, using Kodak RA 2000 developer
and replenisher (1:2) are:
Rapid Access Processors, 20 seconds at 95° F (35° C)
Tank Turnovers per Week Percent Exposed Area Basic Replenishment Rates
Minimum of 0.5 50% 0.23 mL/sq in (350 mL/ sq m)
The recommended starting points for development and replenishment, using Kodak RA 2000 developer
and replenisher (1:4) are:
Rapid Access Processors, 30 seconds at 95° F (35° C)
Tank Turnovers per Week Percent Exposed Area Basic Replenishment Rates
Minimum of 0.5 50% 0.30 mL/sq in (465 mL/ sq m)
© Kodak, 2006. Kodak and Gen 5 are trademarks of Kodak.