Filter
Top Products
19
• Black cloth
• Magazine belt clips and pick
• This copy of Cinematographer’s Field Guide,
KODAK Publication No. H-2.
To o l s
• Longnose pliers
• Diagonal cutters
• Channel Lock pliers
• Scre w d r i v e rs
—
S t a n d a rd and Phillips
• Jeweler’s screwdriver set
• Allen wre n c h e s
• Open end and box wrench sets
• Files (for metal and wood)
• Pocket knife
• “C” clamps 3-in. (7.5 cm)
• Spring clamps
• Scriber
•
1
⁄4 x 20 screws 1- and 2
1
⁄2-in. (2.5 and 6 cm)
•
3
⁄8 x 16 screws 1- and 2
1
⁄2-in. (2.5 and 6 cm)
• Wa s h e r s
• Tape measure
• Voltmeter (w/adequate range to cover voltages likely
to be encountered on location assignments)
• Electrical tape
• G round adapters (both the 3-pin plug adapter
and water pipe clamp types)
• Electric drill and bits, up to
3
⁄8-in. (0.75 cm)
• Soldering iron and solder
• Small and medium Crescent wre n c h e s
• Expansion bit (and bit brace, if not electric)
• Flashlight
Camera Accessories
• 100-ft (30 m) camera spool*
• 200-ft (61 m) camera spool*
• Spare film core s
• Spare 85 conversion fil t e r s
• Assorted ND filters (at least 0.3, 0.6, and 0.9)
• Black camera tape
• Gaffer tape
*Load and unload all camera spools in total darkness.
033text_c 1/16/02 11:07 AM Page 65