Filter
Top Products
38 www.kodak.com/go/support
Troubleshooting
In Review mode,
you do not see a
picture (or the
expected picture)
on the LCD screen.
■ Check the image storage location setting (page 21).
In Review mode, a
blue or black
screen is displayed
instead of a
picture.
■ Transfer the picture to the computer (page 13), then format the card in
the camera (page 21).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
Shutter button
does not work.
■ Turn on the camera (page 2).
■ Wait until the Ready light stops blinking red before attempting to take
another picture.
■ Transfer pictures to the computer (page 13), delete pictures from the
camera (page 11), switch image storage locations (page 21), or insert
a card with available memory (page 3).
■ For best pictures, see page 4.
Slide show does
not run on external
video device.
■ Adjust the camera Video Out setting (NTSC or PAL, page 24).
■ See the external device’s user’s guide.
Picture is too light.
■ Move so there is at least 2 ft (0.6 m) between camera and subject.
■ Decrease Exposure Compensation (page 21).
Picture is not clear.
■ Clean the lens (page 53).
■ Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
■ Place the camera on a flat, steady surface or use a tripod.
If... Try one or more the following