Filter
Top Products
20
Flash off
When you do not want to use the flash,
especially indoors where flash is
prohibited or capture the ambiance of
existing light, use the flash-off feature.
Use a tripod or place the camera on
another firm support, and use high-
speed film because the shutter speed in
these situations will most likely be slow.
1. Completely lift up the lens cover/
flash (3) to uncover the lens (7)
and to turn on the camera.
2. Repeatedly press the flash-mode
button (15) until the desired
indicator(s) for auto flash without red-
eye reduction (indicator [40]), auto
flash with red-eye reduction
(indicators [40] & [35]), fill flash
(indicator [41]), fill flash with red-eye
reduction (indicators [41] & [35]) or
flash off (indicator [28]) appear on the
LCD panel (13).
3. Frame your subject within the
viewfinder eyepiece (12).
4. Partially depress the shutter
button (1). When the flash/camera-
ready lamp (11) glows green, fully
depress the shutter button to take
the picture.
The fill-flash and flash-off modes
cancel when you turn off the camera,
select a different flash mode, or when
the camera powers down. The auto-
flash modes remain selected in
these instances.
OFF