Filter
Top Products
36 www.kodak.com/go/support
Doing more with your camera
Exposure Compensation—adjust the exposure; good for controlling backlit or
non-standard scenes. If the picture is too light, decrease the setting; if it’s too dark,
increase the setting.
ISO speed—adjust the camera’s sensitivity to light. Higher ISO indicates greater
sensitivity. (ISO 3200 and 6400 available only in 3.1 MP and lower picture size in P
and M modes.)
NOTE: A higher ISO may produce unwanted grain or “noise” in a picture.
Focus mode—select a large or concentrated area of focus.
Using the framing grid to compose a picture
The framing grid divides the LCD into thirds—vertically and horizontally. This is
helpful if, for example, you want to balance a picture between water, earth, and sky.
To turn on/off the framing grid, see page 31.
Focus mode Description
Normal AF
Focus setting for general picture-taking.
Macro
Sharpness and detail in pictures at close range. Use available light instead
of flash, if possible. The camera automatically sets the focus distance
depending on the zoom position. The close-up distances are:
Wide angle: 7.9–27.6 in. (0.2–0.7 m)
Telephoto: 19.7–39.4 in. (0.5–1.0 m)
Infinity
Distant subjects. Auto-focus framing marks are unavailable.
Manual
Focus is at center position. When MF icon appears, press OK to display
focus indicator. Press to adjust the setting. A magnified image
appears on the screen when adjusting focus position.