Filter
Top Products
14 www.kodak.com/go/support
Appendix
■ Go to www.kodak.com/go/reach for information about the presence of substances
included on the candidate list according to article 59(1) of Regulation (EC) No.
1907/2006 (REACH).
■ If using this product in an airplane, observe all instructions of the airline.
■ For more information, go to www.kodak.com/go/batteries.
Care and maintenance
■ Before inserting or removing a card, make sure your hands, the camera, and the
card are completely dry.
■ If water has entered the camera, remove the card. Allow all components to air-dry
for at least 24 hours before using the camera.
■ Wipe off dirt or sand from the door seals—debris could compromise the seal and
cause a leak in water.
■ Do not subject the camera to temperatures lower than 0 (32° F) or higher than
40
° C (104° F) for an extended time—the integrity of the seals may be
compromised. Wait until camera reaches operating temperatures before using.
■ Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.
■ Service agreements may be available in your country. Contact a dealer of KODAK
Products for more information.
■ For camera disposal or recycling information, contact your local authorities. In the
US, go to the Electronics Industry Alliance Web site at www.eiae.org or Kodak at
www.kodak.com/go/support.