Filter
Top Products
12 www.kodak.com/go/support
Using your camera
Using the camera under water
CAUTION:
The camera does not float. To prevent it from sinking, secure it with the
strap. To keep the camera waterproof, tightly close all doors. Do not open
doors in water or when hands are wet. Waterproof integrity may be
compromised if the camera is dropped. For more information, see
page 20.
1 Press the Settings button, then choose Underwater Mode .
2 Press to choose the checkmark, then press OK.
3 Press the Liveview button, then take videos/pictures as you normally do.
4 When finished taking underwater videos/pictures, turn Underwater Mode off.
After using the camera in water
■ Wipe off water or debris. If the camera was used in chemically treated water or
saltwater, rinse it in fresh water, then use a soft towel to dry it.
■ If water has entered the camera, remove the battery/card. Allow camera to air-dry
for at least 24 hours before using.
3 meters (9.8 feet)