Filter
Top Products
3938
FOCUS HOLD IN REMOTE CONTROL MODE
When your subject is not in the center of the picture,
use focus hold (p. 20 in the camera manual)
1. Select remote-control mode on the
camera.
2. Center the focus frame on your subject,
adjust zoom as desired, then press and
hold the camera’s shutter-relaease button
partway down until the green focus lamp
glows.
The remote control mode will remain selected after the picture has been taken.
Press the drive-mode button to delete the remote-control icon, or turn the
camera off.
CANCELLATION
• To save power, the camera automatically shuts down and the lens retracts if
the shutter is not released in approximately 8 min.
• The distance may be shorter or the remote control may not operate with backlit
subjects, under fluorescent light, or in extremely bright lighting conditions.
IR REMOTE CONTROL RC-3 (SOLD SEPARATELY)
Continued on next page.