Filter
Top Products
45
3.Press the ADJ button to change the blinking
item.
• Data continues changing as long as the button is held
down
4.Repeat steps 2 and 3 until all items in the
date and time display are correct.
5.Press the SEL button until all items stop
blinking to set the updated information.
44
Note: The date and time must be reset each time the batteries are
replaced.
1.Turn the camera off, then press the DATE
button to display the date.
2.Press the SEL button until the item you
want to adjust blinks.
• Each press of the select button causes the next item
to blink. The sequence is:
YY MM DD hh mm
stops
blinking
SETTING THE DATE OR TIME
FOR OWNERS OF THE QUARTZ DATE MODEL
Continued on next page.