Konica Minolta 140 Digital Camera User Manual


 
6160
FOR OWNERS OF THE QUARTZ-DATE MODEL
3.Press the adjust (ADJ) button or zoom lever
to change the blinking item.
The numerals continues to change as long as the
button is held down.
Pressing the W side of the zoom lever counts down,
the T side counts up.
CHANGING THE DATE FORMAT
1.Press the date button until “SEt” appears on
the data panel.
2.Press and hold the select (SEL) button for
more than 2 seconds until all items on the
date display blink.
Continued on next page.
ADVANCED OPERATION
4.Repeat steps 2 and 3 until all items in the
date and time display are correct.
5.Press the date button to set the date and
time.
The camera will return to the shooting mode
automatically after five seconds. Pressing the date
button again or pressing the shutter-release button
partway down will also return the camera to the
shooting mode.
Pressing the select (SEL) button until the date/time display stops blinking can
also set the calendar and clock.