Filter
Top Products
69
REMOTE CONTROL MODE (OPTIONAL) CONT.
68
2. Compose your picture.
Focus Hold in Remote Control Mode
1. Set the camera to the remote control mode.
2. Center your subject in the focus frame, then press
the shutter-release button partway down until the
green focus lamp glows.
3. Point the remote toward the front of the camera
and press • or 2s.
• If you press the release button marked with •, the flash will
fire once before the picture is be taken.
• If you press the delay button (2s), the flash will fire four
times before the picture is taken.
• If flash cancel is selected, the flash will not fire.
3. Lift your finger from the shutter-release button and
recompose your picture.
4. Point the remote toward the front of the camera and
press • or 2s.
• The focus will stay locked until the focus is reset, remote-
control mode is canceled, or the camera is turned off.