Filter
Top Products
139
CONNECTING TO MAC OS 8.6
To download and install this software, follow the instruction on the Apple web site. Always read the
attached terms and conditions before installing any new software.
To access this camera with a computer with Mac OS 8.6, the USB storage support software must be
installed first.This software is supplied by Apple Computer, Inc. free of charge.The latest version can
be downloaded from the Apple Software Updates web site at http://www.apple.com/support.
AUTO POWER SAVE (DATA-TRANSFER MODE)
If the camera does not receive a read or write command within ten minutes, it will shut down to save
power. When the camera shuts down, an unsafe-removal-of-device warning may appear on the com-
puter monitor. Click “OK.” Neither the camera or computer will be damaged in this operation.
Pressing the shutter-release button will reactivate the camera. Remake the USB connection with the
data-transfer menu (steps 5 and 6 on page 133).
QUICKTIME SYSTEM REQUIREMENTS
To install QuickTime, follow the instructions
in the installer. Macintosh users can down-
load the latest version of QuickTime free of
charge from the Apple Computer web site
at http://www.apple.com.
IBM PC / AT compatible
Pentium-based computer
Windows 95, 98, 98SE, NT, Me,
2000 Professional, or XP.
32MB or more of RAM
Sound Blaster or compatible sound card
DirectX 3.0 or later recommended