Filter
Top Products
Confirm the transfer-mode option in section 4 of the setup menu is
set to PictBridge. Connect the camera to a PictBridge compatible
printer using the camera’s USB cable. The larger plug on the cable
is connected to the printer. Open the AV out/ USB port cover and
insert the smaller plug of the cable into the camera. Turn the cam-
era on; the PictBridge screen is displayed automatically.
Individual still images can be selected for printing on the PictBridge
screen. For other printing options, see the menu navigation section
on page 110.
108 Data-transfer mode
PictBridge
Use the left/right keys of the controller to display
the image to be printed.
Total number of prints
Number of copies
Press the up key to select the number of copies
to be printed. To deselect an image for printing,
press the down key until the number of copies
reaches zero.
Repeat the previous steps until all the images to be printed are selected. Press the cen-
tral button of the controller to continue.
:select:move :print