Konica Minolta Z3 Camcorder User Manual


 
82 Advanced playback
The DPOF-set menu option is used to create an order for standard prints from still images on the
memory card. Single, multiple, or all images can be printed. Print orders are created in section 3 of
the playback menu (p. 72). The print menu option has four settings:
About DPOF
This camera is supported by DPOF™ version 1.1. The DPOF (Digital Print Order Format) allows
direct printing of still images from digital cameras. After the DPOF file is created, the memory card
is simply taken to a photofinishing service or inserted into the memory-card slot of DPOF compati-
ble printers. When a DPOF file is created, a misc. folder is automatically created on the memory
card to store it (p. 102).
DPOF setup
To create a DPOF file for the displayed or highlighted image.
This
frame
All frames
Marked
frames
To chose a group of images to be printed or when the number of copies of each
image varies. When selected, the frame selection screen appears. Use the left/right
keys of the controller to highlight an image to be printed. Pressing the up key will
mark the image with the print indicator. The number next to the indicator shows the
number of copies that will be printed. Pressing the up key increases the number of
copies, pressing the down key decreases the number. A maximum of nine copies
can be ordered. To deselect an image for printing, press the down key until the num-
ber of copies reaches zero and the print indicator disappears. Continue until all the
images to be printed are marked. Press the central button of the controller to create
the DPOF file, or press the menu button to cancel the operation and return to the
playback menu.
To create a DPOF file for all images on the memory card.
Cancel all
To delete the DPOF file.