Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Configuring and Operating your PIP-300
14
7.1.1 The Mode Submenu
Table 4 defines the MODE submenu features:
Table 4: The MODE Submenu Features
Mode Function
SINGLE Displays one input channel at a time on the screen (full screen display). The LCD display
shows the display mode and the selected channel, for example, “Single Mode – Channel 2”
PIP Displays all 3 input channels
1
on the screen. Once the PIP mode is selected, the PIP SIZING
and PIP POSITION commands appear, as illustrated in Figure 6 (see section 7.1.1.1). The
LCD display shows “PIP Mode”
Figure 6: PIP Mode
When selecting the SINGLE mode following the PIP mode, the input channel
(that is currently selected) is displayed.
7.1.1.1 PIP Sizing and Position
To size and/or position a PIP image (as Table 5 defines):
1. Press the desired input channel button (1 to 3)
1
. The input button blinks.
2. Select either PIP SIZING or PIP POSITION (using the up/down arrow
buttons) and press ENTER.
Table 5: PIP Sizing and Positioning Features
Menu Item Function
PIP SIZING Use the , arrow buttons to select between 1/1, 1/4, 1/9 and 1/16 display sizes or OFF
2
PIP POSITION
Use the
,
,
and
arrow buttons to position the selected channel vertically
and horizontally
1 PIP-200xl has two input channels
2 If OFF is selected, the selected input channel will not be displayed on the screen