Filter
Top Products
Configuring and Operating your PIP-300
15
When using one of the inputs as a full-sized background (PIP size 1/1), it is
recommended to limit the sizes of the other PIP windows according to Table
6. Combinations having window sizes larger than recommended, may result
in intermittent interruptions in the picture.
Note that these restrictions only apply when a 1:1 sized picture is used. When all
the pictures are reduced in size, there are no restrictions
Table 6: Recommended PIP sizes
1 PIP 2 PIPs
1/4 1/4 + 1/9
1/9 1/4 + 1/16
1/16 1/9 + 1/9
1/9 + 1/16
1/16 + 1/16
7.1.2 The Video Settings Submenu
Table 7 defines the video settings:
Table 7: Video Settings Submenu Features
Menu Item Function Range Default
CONTRAST Use the up/down arrow buttons to set the contrast 0 to 100 55
SATURATION Use the up/down arrow buttons to set the saturation 0 to 100 51
BRIGHTNESS Use the up/down arrow buttons to set the brightness 0 to 100 33
Video settings apply to all the input channels.
7.1.3 The Presets Submenu
Table 8 defines the Presets submenu:
Table 8: Presets Submenu Features
Menu Item Function
STORE
1
Select PRESET 1 and PRESET 2 to store the mode settings (channel number
when in the SINGLE mode, size and positioning in PIP mode), and the video
settings (contrast, saturation and brightness)
RECALL Recall PRESET 1 and PRESET 2 settings, or set to FACTORY DEFAULT
2
1 When storing a new setting, wait 10 seconds for the setup to be saved
2 The machine is set to Single mode, Channel 1, default video settings and default labeling