Filter
Top Products
VP-790 Blending Images – Setting Blend Width 7
3 Setting Blend Width
In the Multiunit menu:
1. Select Blend Curve Type and select Align Pattern to turn on the Blend Width
alignment tool.
The align pattern displays a sharp border of the blend and non-blend regions, making it
easier to determine the width of the blend and control of the 4-corner set-up.
Figure 6: Two Projected Images Displaying the Horizontal Bar Test Pattern
UFigure 6U shows two projections side-by-side displaying the grey H Bars test pattern
with the Blend Width alignment tool.
2. Select the Blend Width item.
3. Adjust the number of pixels to equal the optical overlap, using the alignment
pattern.
The default blend width is 200 pixels
4. Keep the Blend Offset value 0.