Filter
Top Products
Connecting the VS-6EIII 4x4 Video Audio Matrix Switcher
5
5 Connecting the VS-6EIII 4x4 Video Audio Matrix
Switcher
To connect
1
the VS-6EIII 4x4 Video Audio Matrix Switcher, as illustrated
in the example in Figure 2
, do the following
2
:
1. Connect up to four composite video sources (for example, DVD players)
to the A, B, C, and D VIDEO BNC IN connectors, and the appropriate
AUDIO L and R RCA IN connectors.
2. Connect the VIDEO BNC OUT connectors and the appropriate AUDIO
L and R RCA OUT connectors to up to four composite video acceptors,
for example:
The VIDEO OUT 1 to a display and the AUDIO OUT 1 to
an AV receiver with speakers
The VIDEO OUT 4 and the AUDIO OUT 4 to a plasma
display
3. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in Figure 2
).
1 You do not have to connect all the inputs and the outputs
2 Switch OFF the power on each device before connecting it to your VS-6EIII. After connecting your VS-6EIII, switch on its
power and then switch on the power on each device