Kyocera FS-4020DN Photo Scanner User Manual


 
Basic
Creating a Custom Page Size
To use custom page sizes, they must be created and added to the Print size
list. The driver supports a maximum of twenty custom sizes.
1
In the Basic tab, click Page Sizes.
2
Click New.
3
A default custom name appears in the Name box. Type a name for your custom
page size.
4
Type or select values for the height and width. If the height or width value
exceeds the allowable limit, it automatically adjusts to the limit after Apply or
OK is clicked.
5
When done, click Apply.
The custom page size appears in the Print size list, which is used for enlarging
and reducing the sizes of prints.
To delete a custom page size from the Page Sizes dialog box, select the name
of the custom page size and click Delete.
Printing with Custom Size Pages
You can print on custom-sized pages (or other media such as transparencies)
by performing these steps:
1
In your application, select Print from the File menu.
2
In the Print dialog box, click Properties.
3
In the Basic tab, select the name of your custom page size in the Print Size list.
4
From the Source list, select the MP tray for the custom page size. Click OK to
return to the Print dialog box. Click OK to start printing.
Duplex Printing
Duplex printing is printing on both sides of each page. Select Print on both
sides to start duplex printing. If it is not selected, then the printer prints on only
one side of each page. The printer system contains a duplex unit that turns the
paper over to allow printing on the reverse side. Print on both sides must be
selected to print on both sides of the cover and insert pages.
Flip on long edge
Turn the long edge of the page to view the content, like the pages of a book
bound at the side.
Flip on short edge
Turn the short edge of the page to view the content, like a tablet bound at the
top.
User Guide
4-3