DISPLAYS
2.1 IN RECORD MODE
Note:
The displays listed here and mentioned throughout these instructions all appear either
in the monitor or the optionally available external electronic viewnder, depending on
whether the latter is switched on or off with its own respective button. None the less,
these instructions only refer to the monitor.
For more information on the Leica EVF 2, see p. 152 and the viewfinder’s instructions.
2.1.1 Exposure mode
a.
P
: Programmed automatic exposure mode
b.
A
: Aperture priority mode
c.
T
: Speed priority mode
d.
M
: Manual setting of shutter speed and aperture
2.1.2 Flash mode
(for built-in and external ash units, ashes in red if ash is not ready, otherwise white)
a.
:
Automatic flash activation
b. :
Automatic flash activation with pre-flash
c. :
Manual flash activation
d. :
Manual flash activation with pre-flash
e. :
Automatic flash activation with slower shutter speeds
f. :
Automatic flash activation with pre-flash and slower shutter
speeds
g. :
xed ash power to release slave ash lights
2.1.3 ISO sensitivity
1
(appears in the place of 2.1.2 when flash is switched off; AUTO ISO values appear even if
displays are switched off when shutter release button is pressed)
a. AUTO ISO
b. 100
c. 200
d. 400
e. 800
f. 1600
g. 3200
h. 6400
i. 12500
2.1.4 Compression rate
a. JPG Super fine
b. JPG fine
c. DNG + JPG S. fine
d. DNG + JPG fine
1
According to CIPA DC-004 Standard
90
2.1.19
2.1.12
2.1.52.1.32.1.22.1.1
2.1.25
2.1.24
2.1.23
2.1.22
2.1.21
2.1.13
2.1.7
2.1.6
2.1.11
2.1.9
2.1.10
2.1.8
2.1.20 2.1.17 2.1.15 2.1.14
2.1.18 2.1.16
2.1.4