Inserting the film
Open the camera back: push the clamp (17)
in the direction of the arrow, hold it in
position, and at the same time pull out the
rewind crank (18). When the rewind crank is
pulled out further the camera back will open
automatically after overcoming a safety
lock. The film counter (1) returns to "-2".
Wind and release the shutter. Insert the film
leader in one of the slots of the take-up
spool as shown in the illustration. Please
ensure that the film leader is gripped by at
least one holder.
Insert the film cartridge in the empty space
only now. Push in the rewind crank. The
edge of the film must be parallel to the film
guide, and the teeth of the transport
sprocket must engage the perforation holes
of the film during careful operation of the
rapid transport lever.
Not For Resale – Free Download at http://www.joe-chan.com/manuals
24