Filter
Top Products
Taking the film out
When the inserted film is completely ex-
posed, increased resistance will be felt on
the rapid transport lever (4). The film must
be rewound into its cartridge as follows:
push the button for the rewind release (27)
on the underside of the camera body, turn
the rewind crank out (18) and in the di-
rection of the arrow until the film, after slight
resistance has been overcome, is wound
back into the cartridge after a further turn.
Pull out the rewind crank (18) after
releasing the clamp (17), open the camera
body and take out the film cartridge. During
rewinding the frame counter (1) moves
backwards.
Hints for the care of the LEICAFLEX and
its lenses
Dust and fluff on the mirror is best re-
moved — carefully — with a soft, dry sable
brush degreased repeatedly in ether before
and during the cleaning operation. The
brush must, however, be absolutely dry
during cleaning. Dust and fluff on the lower
viewfinder screen should be removed only if
the viewfinder image is very badly affected
by it.
For this purpose we recommend a dry
brush repeatedly degreased in ether. Avoid
touching the viewfinder screen with the
mount of the brush. Important::
Never blow
into the mirror space, as this may carry
Not For Resale – Free Download at http://www.joe-chan.com/manuals
26