Filter
Top Products
6
Installing the Camera
4. INSTALLING THE CAMERA
4.1 Before Installing the Camera
Decide if you are going to run the cables through the wall /
ceiling (drilling required) or along the wall / ceiling.
• If you are running the cables through the wall / ceiling,
co
nnect the power and BNC video cables to the camera
before installing. See “Connecting the Camera” on page 12
for details.
• If you are running the cables along the wall / ceiling, follow
the instructions below before connecting the camera
power and BNC video cables.
4.2 To Install the Camera
1 Use the included allen key to loosen the base screws
(Figure 1). Twist the mounting base until it loosens; then,
separat
e the camera from the mounting base.
Base screws
(1 on each side)
Twist the base until
it loosens; then,
pull to separate.
Figure 1: Figure 2:
Camera
Mounting
base