Filter
Top Products
9
Installing the Camera
5 Adjust the camera position as
needed (see “Positioning” on
page 10 for details).
Correct sensor
position
NOTE: Ensure that the sensor is
directly below the camera
lens (in the 6 o‘clock
position) or the image will
appear rotated.
6 T
ighten the screws to secure the
c
amera in position and snap the
screw cap over the arm screw.
Lens screws
Base
screws
Arm screw
Screw cap
Do not over-tighten the screws, as
this may crack the camera or base.
7 If you are running the cables along the wall / ceiling,
connect the camera power and BNC video cables. See
“Connecting the Camera” on page 12 for details.