Filter
Top Products
5
Connecting The Camera
Wireless Receiver Setup
To connect a wireless receiver to a surveillance recorder (DVR):
1 Connect the BNC connector on the receiver directly into an available video input.
NOTE: If necessary, attach the 3ft (1m) BNC/BNC e
xtension cable at one end to the receiver
and at the other end to the surveillance recorder.
2 Connect the power cable from the receiver to the power adapter. Plug the power adapter into
an outl
et or surge protector.
NOTE: For instructions on powering multiple receiv
ers, see “Powering Multiple Receivers
Using The Power Splitter Cable (LW2110PK2 only)” on page 7.
To connect the wireless receiver to a TV or VCR:
1 Attach the included BNC/RCA adapter to the BNC connector on the receiver and plug the
r
eceiver directly into an available video input on the TV or VCR.
NOTE: If neces
sary, attach one end of the 3ft (1m) BNC/BNC extension cable to the receiver
and at the other end attach the BNC/RCA adapter, then connect the BNC/RCA
adapter to the viewing/recording device.
2 Co
nnect the power cable from the receiver to the cable of the power adapter. Plug the power
adapt
er into a local AC power outlet or surge protector.
Make sure to first connect and
power on the camera(s) before
powering on the receiver; this will
ensure a proper connection.
Connect the BNC connector to the BNC to
RCA adapter (included).
BNC extension cable
Receiver
Make sure to first connect and
power on the camera(s) before
powering on the receiver; this will
ensure a proper connection.
Rear panel of TV.