LOREX Technology SG7125 Security Camera User Manual


 
-4-
Dome
Camera
Camera input
Monitor
IMPORTANT NOTE:
Keep camera installed away from direct
sunlight. Also avoid places where humidity
and moisture are high.
Typical Configuration showing a dome camera connected to an Observation System:
OPERATION:
Since this camera has a fixed lens, the camera lens must be adjusted manually to the desired position for
optimum viewing before installing the plastic bubble housing on the base plate.
TECHNICAL SPECIFICATIONS:
62 degrees horizontallyViewing Angle
1.3Vp-p (at 0.5M from camera)Audio Output
Powered from monitor via cablePower Supply
-10°C ~ +50°C(-14°F ~ 122°F)Operating Temperature
5” (Diameter) x 3.5”(Height) Dimensions
1.1Vp-p (75 Ohms)Video Output
1.0 Lux (F2.0)Minimum Illumination
More than 45dBS/N Ratio
1/60 ~ 1/10,000 sec. Shutter Speed
3.6mm, F2.0 Lens
350 LinesHorizontal Resolution
512(H) x 492(V) Effective Pixels
1/4" Color CCDImage Sensor
Distributed By:
STRATEGIC VISTA
300 Alden Road, Markham, Ontario, Canada L3R 4C1
For more information:
www.strategicvista.com
As our products are subject to continuous improvement, SVII and its subsidiaries reserve the right to modify
product design, specifications and prices, without notice and without incurring any obligation. E&OE