Filter
Top Products
10
SHS-4SM - Front View
SHS-4SM - Front View
3. CAM SELECT BUTTON - Manually changes the camera view between available channels. If
a channel is empty (a camera is not connected), then the switcher will move to the next detected
channel (i.e. Cameras are connected on channels 2 and 3. If the switcher is displaying CAM3
and the CAM SELECT button is pressed, the switcher will skip over CAM4 and CAM1 as there
are no cameras connected, and will display CAM2).
4. ALARM DURATION DIAL - Sets the Alarm DWELL TIME between 5 and 30 seconds. When
motion is detected by the PIR Camera, the switcher will switch to that camera and display the
image for the time set by the ALARM DURATION DIAL.
5. PIR ON/OFF SWITCH - Turns PIR detection ON or OFF. If PIR detection is set to OFF, the
switcher will not detect motion on any channel.
1
2
3
45