Filter
Top Products
9
SHS-4SM - Front View
SHS-4SM - Front View
1. GREEN LED INDICATORS - Four green LED indicators display the current active camera
(corresponding to the rear DIN inputs CAM1-CAM4).’
2. AUTO/MANUAL SCAN BUTTON - Scans through the available cameras. When the switcher
is initially powered on, the scan type is set to AUTO and will cycle through all available cameras
(CAM1-CAM4), displaying one image at a time. The RED LED indicator will be ON or flashing
to indicate the switcher is in AUTO SCAN mode.
The AUTO SCAN has a default of 2 seconds per channel. To change this setting, press and
hold the CAM SELECT button for 2 seconds to set the preferred duration:
z 2 Second Display Interval - The RED LED is solid
z 5 Second Display Interval - The RED LED will flash (fast flash)
z 10 Second Display Interval - The RED LED will flash (slow flash)
To view a specific camera, press the AUTO/MANUAL button to set the switcher to Manual
mode (The RED LED will be OFF). Individual cameras can be viewed by pressing the CAM
SELECT button.
1
2
3
45