Filter
Top Products
English - 13
4.2 Mounting the DC265 at desktop
1. Please set up the DIP Switch settings first. Refer to Chapter 5 “DIP
Switch Settings” in the DC265 user manual.
2. Please refer to the Base Installation Guide for installation instructions
for all parts.
4.3 Connecting devices
4.3.1 Step 1: Plugging in the power outlet
<Note> Appearance of power cord may vary with countries/regions.
4.3.2 Step 2: Connecting with components
Connecting to a projector
Connect the VGA OUT on the DC265 to the VGA IN on the projector
using the VGA cable.
Connecting to a monitor
Use VGA cable to connect VGA PASSTHROUGH connector on DC265
to the VGA IN connector on a monitor.
[Note] The VGA PASSTHROUGH connector only outputs VGA IN
signals.
AC Outlet