Filter
Top Products
English - 33
2. Press [] or [] to access the [Advanced] menu.
3. Press [] to select [Factory Reset].
4. Press [] or [] to select [Yes].
5. Press [Enter] to activate.
7.17 I would like to reduce the image noise (Projector
Type)
This function enables visual presenter to automatically clear image noise.
The noise is especially obvious when Visual presenter is connected to a
DLP projector. You can use this function to improve the image quality.
1. Press [Menu] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Setting].
3. Press [] to [Projector Type].
4. Press [] or [] to select [DLP/LCD].
5. Press [Menu] to exit.
7.18 I would like to change the Start Logo
<Remark> The Start Logo file (.jpg) should be less than 5MB.
1. Press [DELETE] + [] on the control panel to enter Service Menu.
2. Press [] or [] to select [Logo].
3. Press [] to [Image], and press [ENTER] to read the stored files.
4. Press [], [], [] or [] to select a file, and press [ENTER] to apply
the change.
5. Press [] to [Loge Select], and press [] or [] to select
[Customer Logo].