Filter
Top Products
English- 14
Chapter 5 Start Using
<Note>: Please adjust it to be suitable for the local voltage frequency of
50/60 Hz. For the frequency in actual use, please refer to the manual
(Appendix 1)
.
1. Pull up the camera and the camera arm. The camera should aim at the
center of the presenter.
2. Pull up the lamp arm to a proper position.
3. Place an object to be displayed under the camera.
4. Press [POWER]
on the remote control or control panel to power
on.
5. Press control panel [AUTO TUNE]
button to optimize the image.
You are ready to present.
6. Each time the camera head is moved, press [AUTO TUNE]
on the
remote control or control panel to refocus the lens.
<Note>: According to your request, you can adjust the camera head
slightly to aim at the center of the documents when the anchor of lens
was reached.