Filter
Top Products
English- 33
image noise. The noise is especially obvious when Document
Camera is connected to a DLP projector. You can set the DLP
projector to improve the image quality.
2. If there is special noise when VGA OUT is connected, please set
DLP option to improve the image quality.
2.1. Press [MENU] on the remote control or control panel to activate
the setting menu.
2.2. Press [], [], [], or [] to select [Setting].
2.3. Press [ENTER] to activate.
2.4. Press [] or [] to select [Control].
2.5. Press [] to [Projector Type].
2.6. Press [] or [] to select [LCD/DLP].
2.7. Press [MENU] to exit.
7.23 I would like to change the power on image
<Note> The power on image file must be less than 5 MB and in JPEG
format.
<Note> To save the file, please follow the instruction below:
File path: \DCIM\100MEDIA, for example: J: \DCIM\100MEDIA
File name: four English letters+ four numbers, for example: LUMN0001.JPG
1. Press [MENU] on the remote control or control panel to activate
the setting menu.
2. Press [], [], [], or [] to select [Setting].
3. Press [ENTER] to activate.
4. Press [] or [] to select [Advanced] menu.
5. Press [] to select [Power On Image Setting].
6. Press [ENTER] to activate.
7. Press [] or [] to select [Power On Image Setting] and press [] or
[] to select [Default/Customer].