Filter
Top Products
Operating the Cocking Lever
When depressing the Cocking Lever, be sure to push it all the way
forward (toward the Shutter Release Button). If the Cocking Lever is
not pressed forward as far as it will go, it will return to its original
position when released, but the shutter will not be cocked. At such a
time, shutter will not operate and an orange warning lamp will
illuminate in the viewfinder when the Shutter Release Button is
depressed.
Note:
It may happen that when attaching the
Roll Film Holder, or after having rotated
the holder attached to the revolving back,
the film advance coupling mechanisms
between camera and holder may not
properly mesh. In this case the shutter
cannot be fired when the release is
pressed and the orange warning lamp will
light in the viewfinder.
By moving the "M/R" lever to "R" and
pushing the cocking lever slightly, the
couplings will mesh and the release but-
ton will function again.
19
LED Monitor Lamp and Electronic Warning Sounds
The following page will explain the visual and audio signals which
are built into the camera and which are designed to assure proper
operation and to prevent mistakes.