Filter
Top Products
• Automatic TTL / P-TTL fill-in flash control
∆ Manual flash exposure correction with TTL
• Auto-focus measurement flash control
∆ Pre-flash function for reducing red-eye effect
• Wake-up function for the flash unit
∆ = Dedicated function is performed by the camera or must be
set on the camera.
2.5. mecablitz 36 AF-4 S
• Flash ready indicator in camera viewfinder
• Automatic flash sync speed control
• Automatic flash / triggering control
• TTL flash control (standard TTL without measuring pre-
flash function)
• Pre-flash TTL and ADI metering
• Automatic fill-in flash control
∆ Manual flash exposure correction with TTL
∆ Synchronisation to the 1st or 2nd shutter curtain
• Auto-focus measurement flash control
• Wake-up function for the flash unit
∆ = Dedicated function is performed by the camera or must be
set on the camera.
3. Mounting the mecablitz
3.1 Mounting the mecablitz on the camera
Switch off camera and mecablitz with the main switch!
mecablitz 36 AF-4 C, 36 AF-4 N and 36 AF-4 P
•
Turn the knurled nut against the mecablitz housing until
the stop point is reached.
•
Slide the mecablitz foot completely into the camera’s
accessory shoe.
•
Turn the knurled nut against the camera body as far as
possible, thereby clamping the mecablitz.
mecablitz 36 AF-4 S
• Push the mecablitz with the connection foot as far as it
☞
73
ķ
707 47 0178.A2 36AF-4-CNOPS 05.06.2008 8:29 Uhr Seite 73