Metz 36 AF-4 P Digital Camera User Manual


 
will go into the camera accessory shoe. The safety catch
can be heard to snap into place on the hot shoe.
Lightly press the unlatching button “PUSH” upward to
clamp the mecablitz in the camera’s accessory shoe.
mecablitz 36 AF-4 O
• Push the mecablitz with the connection foot as far as it
will go into the camera accessory shoe. Then press the
“LOCK button” to secure.
3.2 Removing the mecablitz from the camera
Turn off the camera and the mecablitz by their main switch.
mecablitz 36 AF-4 C, 36 AF-4 N and 36 AF-4 P
Turn the knurled nut against the mecablitz housing until
the stop point is reached.
Withdraw the mecablitz from the camera’s accessory
shoe.
mecablitz 36 AF-4 S
Press the unlatching button “PUSH” towards the flash unit
and at the same time hold it lightly down until the “PUSH”
button locks in place.
Withdraw the mecablitz from the camera’s accessory shoe.
mecablitz 36 AF-4 O
Press both side plastic catches Ǡ ǡ on the connection foot
in the direction indicated by the arrows and pull off the
mecablitz at the same time from the camera accessory shoe.
4. Power supply
4.1 Suitable batteries
The mecablitz can be operated with any of the following
batteries:
• 4 NiCad batteries, type IEC KR6 (AA). They permit very
fast recycling and are economical in use because they are
rechargeable.
74
ķ
707 47 0178.A2 36AF-4-CNOPS 05.06.2008 8:29 Uhr Seite 74