Metz SF 63TG62 Camcorder User Manual


 
20
Press this key on the remote
control....
The screen displays Explanation
Programme
StdPict.
▲▼
<< weitere Einstellungen
Logo, Channel, Signal
600+06C-GB
VTR1
ARD
ZDF
SAT 1
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
0
1
2
3
4
5
6
7
8
9
Sound
Sharpness
Noise reduction
CTI
further
3
A1
On
?
MENU
return Help
TV
picture
store ?
OK
TV station table
Programme
StdPict.
▲▼
<< weitere Einstellungen
Logo, Channel, Signal
600+06D-GB
VTR1
ARD
ZDF
SAT 1
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
0
1
2
3
4
5
6
7
8
9
Sound
Sharpness
Noise reduction
CTI
further
3
A1
On
?
MENU
return Help
TV
picture
store ?
OK
TV station table
Programme
StdPict.
▲▼
<< weitere Einstellungen
Logo, Channel, Signal
600+06E-GB
VTR1
ARD
ZDF
SAT 1
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
0
1
2
3
4
5
6
7
8
9
Sound
Sharpness
Noise reduction
CTI
further
3
A1
On
?
MENU
return Help
TV
picture
store ?
OK
TV station table
Programme
Std
Pict.
▲▼
<< weitere Einstellungen
Logo, Channel, Signal
696+06G-GB
LOGIC
ARD
ZDF
SAT 1
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
0
1
2
3
4
5
6
7
8
9
Sound
Chrom. adjustm.
Col. offset adj.
Contrast adj.
Picture format
VCR
00
0
00
4:3
Off
store ?
OK
TV station table
?
MENU
return Help
TV
picture
AV
6.1 Correcting picture deviations
It is possible for stations to be received with differing levels of chrominance, picture sharpness and contrast, even though the settings on
the individual programme positions are identical. For this reason, your TV set enables you to correct the value for each programme
position and/or to select a picture correction function (CTI, noise reduction).
1. Call the first picture menu in
the station table and correct
the picture sharpness
2. Switch on the noise
reduction
3. Switch on the CTI function
4. Call the second picture
menu and adjust the
chrominance
The picture menu contains all settings which can
change the picture.
The picture sharpness can be adjusted separately for
each station in the station table. This setting overrides
the standard setting.
The new value can be saved by pressing the key.
The value set in this manner remains stored even if the
TV is switched off with the main power switch.
OK
This TV set is equipped with a special noise-reduction
function for use where the picture contains „snow“ or
is unclear. The noise reduction function can be set to
A1: automatic motion compensation, slight noise
reduction
A2: automatic motion compensation, high noise
reduction,
A3: no motion compensation, slight noise reduction),
or OFF.
CTI stands for Colour Transient Improvement and
improves the transitions between different coloured
areas of the picture, making the picture appear much
sharper. The CTI function is effective for both trans-
missions received by way of the aerial input and for
signals received via the AV sockets. CTI also provides
a visible improvement when playing back from a video
recorder.
However, in certain applications (such as playing back
from an S-VHS video recorder), the CTI function may
just have the opposite effect.
When playing back from such recorders, CTI can result
in a lower-quality picture. For this reason, this menu
permits you to switch off the CTI function for specific
programme positions.
In this second picture menu, the chrominance, colour
offset and contrast can be corrected individually for
each programme position.
In our example, the chrominance of Programme 1 is to
be diminished. Hold down the key until the colour
intensity is the same as in programme position 3.
The chrominance adjustment range is -15 to +15.
If no other values are to be changed, then press the
key to store the new setting.
OK
-
+
-
+
-
+
-
+
-
red
yellow
blue
white
white
red