Metz NB 1010 Camcorder User Manual


 
13
4. Aerial Control
Switch off AFC
When stations are assigned to the various programme positions, they are automatically tuned to the centre frequency. This is normally
satisfactory.
If the results of this automatic tuning are unsatisfactory, you can turn off the AFC (Automatic Frequency Control) function for specific pro-
gramme positions and adjust the tuning manually.
Select the programme position which is to be tuned manually.
Press this key on the remote
control
The screen displays Explanation
1. Call the menu
„Aerial control“.
2. Switch off the AFC and
adjust the frequency.
3. Store the modified frequen-
cy and return to the TV pic-
ture.
▲▼
>> weitere Einstellungen
Std, Pict., Sound
696+S04H-GB
VTR1
ARD
ZDF
SAT 1
Videorec.1
Aerial
Aerial
Aerial
0
1
2
3
4
5
6
7
8
9
TV station table
?
MENU
return Help
TV
TV picture
LNC pwr supply: H
22 kHz signal: On/Off
Polarizer: 1
Relay: On/Off
AFC: On/Off
AV
LNC pwr supply: H
22 kHz signal: On/Off
Polarizer: 2
Relay: On/Off
AFC: On/Off
AV
The function „AFC“ is set to „On“ in the factory.
This setting causes all programme positions to be
tuned to the centre frequency.
Call the submenu „AFC“ by pressing the red key.
Press the red key again to switch off the AFC function.
The frequency can then be adjusted with the
keys.
When this is done, the station table is removed from
the screen to permit better assessment of the picture
quality.
+
-
Once you are satisfied with the picture, store the set-
tings for this programme position by pressing the
key.
OK
-
+
OK
TV
red
red
red
store ?
OK
696+S00
ˇ
ˇ
LNC pwr supply: H
22 kHz signal: On/Off
Polarizer: 1
Relay: On/Off
AFC: On/Off
AV
696+S04F
-
GB