Filter
Top Products
www.midxtc.com
3
English François Español
Recording
1. Move the RECORD switch forward. This turns the camera on.
2. The battery indicator will light from red to green. The SD card
indicator will illuminate. The camera is capturing audio and video when
the REC indicator is ashing.
3. To stop recording, move the RECORD switch back to the off position.
SD card LED
Status
Meaning
Green 75% more available.
Orange 34% - 75% available.
Red
Less than 34%
or no Micro SD
card installed.
Flashing Red Cannot read the card.
Flashing Green
Indicates card is being
reformatted.
Memory Size
1080p Record
Time
720p Record
Time
480p Record
Time
512 MB 7.5 Minutes 6.5 Minutes 10 Minutes
1 GB 15 Minutes 13 Minutes 20 Minutes
2 GB 30 Minutes 26 Minutes 40 Minutes
4 GB 60 Minutes 52 Minutes 80 Minutes
8 GB 120 Minutes 104 Minutes 160 Minutes
16 GB 240 Minutes 208 Minutes 360 Minutes
32 GB 480 Minutes 416 Minutes 720 Minutes
Note:
1. The camera automatically splits the video into 2 GB segments.
2. HD video requires class 4 micro SD card to record and
playback
Getting to Know the XTC-300
Getting to Know the XTC-300
Battery
1. To insert the battery, push down the battery door latch on the back of
the camera.
2. Pull battery door backwards to open.
3. Install Lithium-Ion battery, observing proper direction.
4. Return battery door and click into place.
Micro SD Card
1. Lift latch on back to open the door
2. Insert Micro SD card into slot observing proper direction (shown below).
3. Close door until it clicks shut
Battery Status
Indicator
Meaning
Solid Green Indicates full battery life
Blinking Green Battery is charging
Solid Orange Medium battery life
Solid Red Indicates low battery life
Blinking Red* Too low to operate
No Light Batteries are depleted.
*Note: When the red battery LED begins blinking, be prepared
to charge the battery because the camera will stop recording
at this point.