Nikon 13309 Digital Camera User Manual


 
202
n
❚❚ The AF-S DX NIKKOR 18–55mm f/3.5–5.6G VR
The AF-S DX NIKKOR 18–55mm f/3.5–5.6G VR is for use exclusively with Nikon DX
format digital cameras.
In the case of the AF-S DX NIKKOR 18–55 mm f/3.5–5.6G VR,
changes to zoom can alter maximum aperture by up to 1
1
/3 EV.
The camera however
automatically takes this into account when setting exposure, and no modifications to
camera settings are required following adjustments to zoom.
A Using the Built-in Flash
When using the built-in flash, be sure the subject is at a range of at least 0.6 m (2 ft) and
remove lens hoods to prevent vignetting (shadows created where the end of the lens
obscures the built-in flash).
Camera Minimum distance without vignetting
D7000, D5100, D5000, D3200, D3100, D3000,
D300 series, D200, D100, D90, D80, D70 series,
D60, D50, D40 series
No vignetting at any focus distance
Because the built-in flash units for the D100 and D70 can only cover the angle of view of a
lens with a focal of 20 mm or more; vignetting will occur at a focal length of 18 mm.
D Lens Care
Keep the CPU contacts clean.
Use a blower to remove dust and lint from the lens surfaces.
To remove smudges and
fingerprints, apply a small amount of ethanol or lens cleaner to a soft, clean cotton cloth
or lens-cleaning tissue and clean from the center outwards using a circular motion, taking
care not to leave smears or touch the glass with your fingers.
Never use organic solvents such as paint thinner or benzene to clean the lens.
The lens hood or NC filters can be used to protect the front lens element.
Attach the front and rear caps before placing the lens in its flexible pouch.
When a lens hood is attached, do not pick up or hold the lens or camera using only the
hood.
If the lens will not be used for an extended period, store it in a cool, dry location to prevent
mold and rust.
Do not store in direct sunlight or with naphtha or camphor moth balls.
Keep the lens dry.
Rusting of the internal mechanism can cause irreparable damage.
Leaving the lens in extremely hot locations could damage or warp parts made from
reinforced plastic.